Iosmodportman-4 - Cisco Catalyst 4500 Series System Message Manual

IOSMODPORTMAN Messages
Error Message C4K_IOSMODPORTMAN-4-MODULETEMPHIGH: Module [dec] Sensor [char]
temperature is at
Explanation
threshold, another message will be logged and the system will shut down to prevent damage to
hardware.
Recommended Action
Error Message C4K_IOSMODPORTMAN-4-MODULETEMPUNDERCRITICAL: Module [dec] Sensor
[char] temperature is now under critical threshold but still very high - current
temp: [dec]C, critical threshold: [dec]C
Explanation
Recommended Action
temperature may still suggest a problem with the module.
Error Message C4K_IOSMODPORTMAN-6-MODULETEMPOK: Module [dec] Sensor [char]
temperature is now ok - CurrentTemp: [dec]C, Threshold: [dec]C
Explanation
Recommended Action
Error Message C4K_IOSMODPORTMAN-4-SSOMODULEOLDVERSION: Received stale
acknowledgement for the linecard in slot [dec]: expected [dec], received [dec].
Explanation
Recommended Action
Error Message C4K_IOSMODPORTMAN-4-FANTRAYBAD:Fan tray has failed
Explanation
Recommended Action
Error Message C4K_IOSMODPORTMAN-4-FANTRAYPARTIALFAILURE: A fan or thermistor/s in
system fan tray have failed
Explanation
system fan tray have failed.
Recommended Action
be immediately affected.
Catalyst 4500 Series Switch Cisco IOS System Message Guide
2-54
or over threshold - CurrentTemp: [dec]C, Threshold: [dec]C
The module temperature is above its threshold. If the temperature goes above critical
Inspect the module and find out why it is heating up.
This message is sent when a module temperature returns to below critical threshold.
This is an informational message only. No action is required. The module
This message is sent when module temperature returns back to normal.
This is an informational message only. No action is required.
This is most probably the result of a linecard being rapidly removed and reinserted.
This is an informational message only. No action is required.
The fan tray failed.
Replace the fan tray as soon as possible.
This is a warning message indicating that one or more fans or thermal sensors in the
Schedule a time to replace the fan tray soon. System performance should not
Chapter 2 Messages and Recovery Procedures
OL-13091-01