Hwl2Man Messages - Cisco Catalyst 4500 Series System Message Manual

Chapter 2 Messages and Recovery Procedures
Error Message C4K_HWACLMAN-4-FAILEDTOSWITCHVLANTAGS: Failed to switch vlan tags, old
tag:
paths:
Error Message C4K_HWACLMAN-4-QOSFEATUREOUTOFSWRESOURCES: Out of memory.
inactive
Error Message C4K_HWACLMAN-4-WARNINGSTRING:[char]

HWL2MAN Messages

This section contains the Layer 2 Hardware Manager (HWL2MAN) message.
Error Message C4K_HWL2MAN-3-STMPARITYERROR: Parity error in Spanning Tree Memory.
OL-13091-01
[object-info] new tag:
[dec]
Explanation Software failed to switch tags. This could be a transient error. The ACL that we were
trying to program will not become active. (The software and hardware path counts are provided for
use by engineers in troubleshooting.)
Recommended Action Detaching and attaching ACLs (and policies) may solve the problem.
on port [char]
Explanation The software could not allocate memory to write the QoS related configuration to the
QoS TCAM hardware. The given QoS policy configuration will not work on the given port until this
is corrected.
This condition might occur under extreme ACL and/or QoS configurations.
Recommended Action
Some workarounds to attempt are:
Try reducing the unwanted QoS and ACL configurations from ports and VLANs.
–
Try disabling and re-enabling QoS via the qos global configuration command.
–
If the problem persists, contact your technical support representative.
A nonspecific warning message was displayed.
Explanation
See the message string [char] for more information.
Recommended Action
There is a parity error in the spanning tree memory, which can indicate a transient
Explanation
hardware problem or a more permanent problem.
If you see this message too often, reboot the switch.
Recommended Action
[object-info] . Software paths:
Catalyst 4500 Series Switch Cisco IOS System Message Guide
HWL2MAN Messages
[dec] Hardware
[char] is
2-39