Pm Messages - Cisco IAD2423-16FXS-RF - IAD 2423 Router System Message Manual

PM Messages

Error Message PLATFORM_VLAN-3-UNLOCK_FAIL: Failed to unlock vlan-id [dec],
associated mapped vlan id value [dec].
PM Messages
This section contains the port manager messages. The port manager is a state machine that controls all
the logical and physical interfaces. All features, such as VLANs, UDLD, and so forth, work with the port
manager to provide switch functions.
Error Message PM-2-LOW_SP_MEM: Switch process available memory is less than [dec]
bytes.
Error Message PM-2-NOMEM: Not enough memory available for [chars].
Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
2-48
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
This message means that the switch failed to unlock a VLAN ID. The most likely cause
Explanation
is that the VLAN is already unlocked. The first [dec] is the VLAN ID, and the second [dec] is the
MVID.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to
look for similar reported problems. If you still require assistance, open a case with the TAC, or
contact your Cisco technical support representative, and provide the representative with the gathered
information. For more information about these online tools and about contacting Cisco, see the
Message Traceback Reports" section on page
This message means that the available memory for the switch processor is low. This can
Explanation
occur when too many Layer 2 VLANs are configured. [dec] is the available memory.
Remove features from the system to reduce memory usage.
Recommended Action
This message means that the port manager subsystem could not obtain the memory it
Explanation
needed to initialize the specified operation. [chars] is the port manager operation.
Copy the message exactly as it appears on the console or in the system log.
Recommended Action
Research and attempt to resolve the error by using the Output Interpreter. Enter the show
tech-support user EXEC command to gather data that might help identify the nature of the error.
Use the Bug Toolkit to look for similar reported problems. If you still require assistance, open a case
with the TAC, or contact your Cisco technical support representative, and provide the representative
with the gathered information. For more information about these online tools and about contacting
Cisco, see the "Error Message Traceback Reports" section on page
Chapter 2 Messages and Recovery Procedures
1-3.
1-3.
1-3.
"Error
"Error
OL-9641-04