Acl Messages; Acl Snooping Messages; Arp Snooping Messages - Cisco Catalyst 4500 Series System Message Manual

ACL Messages

ACL Messages
This section contains the access control list (ACL) message.
Error Message C4K_ACL-4-OUTOFMEMORY:Out of Memory while allocating [char]

ACL Snooping Messages

This section contains the access control list management (ACLSNOOPMAN) messages.
Error Message C4K_ACLSNOOPMAN-4-ACLALLOCFAILURE: Acl Allocation for [char] failed.
Error Message C4K_ACLSNOOPMAN-4-ACLFEATUREALLOCFAILURE: AclFeature Allocation for
Acl Id: [dec] failed.

ARP Snooping Messages

This section contains the ARP snooping message.
Error Message C4K_ARPSNOOPINGMAN-4-OUTOFRESOURCES: Resources for constructing ACLs
are not available.
Catalyst 4500 Series Switch Cisco IOS System Message Guide
2-2
Explanation The software failed to allocate memory for the given object while processing ACLs. The
configuration might have exceeded its maximum limit. If so, the feature using this ACL will not
work.
Recommended Action If it is mandatory that the feature work normally, remove other unwanted
features that require ACLs and retry the operation. If the problem persists, contact your technical
support representative.
This message is logged when there is a new IOS ACL created but no memory for the
Explanation
analogous platform ACL. ACL-based snooping will not function properly on the interface.
Alter or remove the configuration on the switch to reduce memory use.
Recommended Action
This message is logged when there is no memory for the platform ACL-related data
Explanation
structures. ACL-based snooping will not function properly on the interface.
Alter or remove the configuration on the switch to reduce memory use.
Recommended Action
Software resources are not available to setup hardware to redirect ARP packets to
Explanation
software. Dynamic ARP inspection will not work if this log message appears.
Unconfigure other TCAM related features to reduce switch memory
Recommended Action
requirements and reconfigure the ACL.
Chapter 2 Messages and Recovery Procedures
OL-13091-01