Commonhwaclman-4; Commonstubman Messages; C4K_Commonstubman-4 - Cisco Catalyst 4500 Series System Message Manual

Chapter 2 Messages and Recovery Procedures
Error Message
Error Message C4K_COMMONHWACLMAN-4-PERMITALL: Out of resources for Qos, permit all
for [object-info]
Error Message C4K_COMMONHWACLMAN-4-PORTBASEDACLSDISABLED: Output Port Acl [char] has
been disabled on port [char]
Error Message C4K_COMMONHWACLMAN-4-PUNTTOSOFTWARE:Out of resources, punt packets to
sw for [object-info]

COMMONSTUBMAN Messages

This section contains the Catalyst 4500 series ASIC-specific messages.

C4K_COMMONSTUBMAN-4

Error Message C4K_COMMONSTUBMAN-4-DIAGSFAILED: [char] failed diagnostics
OL-13091-01
The switch is running out of hardware CAM resources. All packets are permitted, and
Explanation
QoS is applied.
Remove unnecessary ACLs from some interfaces.
Recommended Action
The output port ACL is disabled on the interface because there are not enough hardware
Explanation
resources or there are ACEs that require CPU processing of packets.
The port ACL is disabled and displays a warning message because the software cannot handle the
output port ACLs.
Recommended Action This is an informational message only. No action is required.
Explanation The hardware content-addressable memory (CAM) resources have been depleted. The
hardware forwards the packets to the software for ACL processing.
Remove unnecessary ACLs from some interfaces.
Recommended Action
An ASIC in slot [char] failed diagnostics.
Explanation
Contact your technical support representative.
Recommended Action
Catalyst 4500 Series Switch Cisco IOS System Message Guide
COMMONSTUBMAN Messages
2-15