AOR AR7000 Manual page 33

C Stop time
Push the [ENT] key when the cursor is placed alongside the item "Stop Time".
Rotate the main dial or push the [ keys to select the desired stop time in
seconds followed by [ENT].
{figure 102}
SQ : The program scan will stop as long as the received signal stays above the
squelch threshold, scan will resume once the signal drops below squelch threshold
and the squelch closes.
01 - 99: The program scan will automatically resume as soon as the pre-determined
stop time (in seconds) has elapsed even if the frequency is still active. If the squelch
closes before stop time has elapse, scan resumes immediately.
D Scan direction
Push the [ENT] key when the cursor is placed alongside the item "Direction". Rotate
the main dial or push the [ keys to select the desired search direction followed
by [ENT].
{figure 103}
FWD : The scan starts from the start ch/bank and scans toward the stop ch/bank
then hops down to the start ch/bank and the process repeats.
REV : The scan starts from the stop ch/bank and scans toward the start ch/bank
then hops to the stop ch/bank and the process repeats.
LOOP : The scan shuttles (bounces) between the start and stop ch/bank limits.
Link : The scan starts from the start ch/bank and progresses toward the stop ch/bank,
then jumps to other program scan groups which may have been linked (forming a
larger group).
E Start
Push the [ENT] key when the cursor is placed alongside the item "Start". Enter the
desired start channel and bank using the main dial and [ keys followed by
[ENT].
{figure 104}
F Stop channel
Push the [ENT] key when the cursor is placed alongside the item "Stop". Enter the
desired stop channel and bank using the main dial and [ keys followed by
[ENT].