Search Pass Bank; Common Pass Bank; Program Pass Bank; Beep - AOR AR7000 Manual

{figure 105}
G Quit
Push the [ENT] key when the cursor is placed alongside the item "Quit". The LCD
will revert to whatever mode was active before the program scan menu was selected.
5 Search pass/bank
The AR7000 has a PASS facility which enables unwanted busy frequencies to be
skipped during the scan and search processes.

5.1 Common pass bank

Memory bank number 14 has been assigned the special status of PASS BANK. Any
number of up to 100 frequencies stored in this memory bank will be ignored (skipped)
during the search and scan sequences.
{figure 106}

5.2 Program pass bank

In addition to the common pass bank, any one of the 14 banks (00 to 13) may be
assigned as an additional pass bank for program search. This makes a total of
200 frequencies (100 for the common pass bank plus a further 100 for the
additionally assigned pass bank). Refer to section 4.5.5.L of this manual for further
information regarding usage of the pass bank facility.
6 Other parameters
Push the [CONF] key in the dial mode or memory mode to access the configuration
menu. (The software version shown in this example is for reference only.)
{figure 107}
Push the [ ] and [ ] keys to select the desired parameter which is to be altered, a red
cursor ">" moves up and down alongside the parameters which are available for
change. Push the [ENT] key to access each menu and use [ENT] to accept the
changes or [ESC] to abort.

6.1 Beep

Push the [ENT] key when the cursor is placed alongside the item "Beep".
{figure 108}
Rotate the main dial or push the [ keys to toggle the beep ON/OFF. Push the
[ENT] when the selection has been made.