AOR AR7000 Manual page 32

Having selected the desired program scan number, push the [RUN/BRK] key to start
the program scan.
{figure 99}
The scan process will temporarily stop when an active signal above the squelch
threshold has been received. The scan process will resume when such signal has
disappeared. In the case of time control scan, the scan process will resume as soon
as the pre-determined stop time has elapsed or when the squelch closes should this
occur first (transmission ends). While the scan process has temporarily stopped,
rotate the main dial or press the [ keys to force the scan to resume.
4.6.3 Brk
To suspend program scan, press the [RUN/BRK] key while the scan is in progress.
The scan action will be suspended and the legend "Brk" will be displayed on the
LCD.
{figure 100}
Rotate the main dial or press the [ keys to step through other channels within
the spectrum display limits of the active LCD window. A dark vertical cursor indicates
current frequency.
4.6.4 Terminate the program scan
Push the [ENT] or [ESC] key to stop the scan action immediately and return to the
program scan menu screen.
4.6.5 Selection of the scan parameter
A Selection of the parameter
Push the [ ] and [ ] keys to select the desired parameter which is to be altered, a red
cursor ">" moves up and down alongside the parameters which are available for
change. Push the [ENT] key to access each menu and use [ENT] to accept the
changes or [ESC] to abort.
B Name
Push the [ENT] key when the cursor is placed alongside the item "Name". The name
editor screen will appear ready to accept your desired text ident. Use the [ ] and [ ]
keys to select character line number, use the main dial to move along each line, use
the [ and keys to move along the seven character text ident, use the [ENT]
key to accept the input for each character. Other options include Insert, Delete,
Space and Quit. Refer to section 7 of this manual for further details.
{figure 101}