AOR AR7000 Manual page 29

key to accept the input for each character. Other options include Insert, Delete,
Space and Quit. Refer to section 7 of this manual for further details.
{figure 87}
C Stop time
Push the [ENT] key when the cursor is placed alongside the item "Stop Time".
{figure 88}
Rotate the main dial or push the [ keys to select the desired stop time in
seconds followed by [ENT].
SQ : The program search will stop as long as the signal stays above the squelch
threshold, search will resume once the signal drops below squelch threshold and the
squelch closes.
01 - 99: The program search will automatically resume as soon as the pre-
determined stop time (in seconds) has elapsed even if the frequency is still active. If
the squelch closes before stop time has elapse, search resumes immediately.
D Search direction
Push the [ENT] key when the cursor is placed alongside the item "Direction". Rotate
the main dial or push the [ keys to select the desired search direction followed
by [ENT].
{figure 89}
FWD : The search starts from the start (lower) frequency and tracks upward in
frequency toward the stop (upper) limit then hops down to the start frequency and
the process repeats.
REV : The search starts from the stop (upper) frequency and tracks downward in
frequency toward the start (lower) limit then hops up to the stop frequency and the
process repeats.
LOOP : The search shuttles (bounces between limits) between the start and stop
frequencies.
Link : The search starts from the start frequency and progresses to the stop
frequency, then jumps to other program search banks which may have been linked
(forming a large family of program search banks).
E Start frequency
Push the [ENT] key when the cursor is placed alongside the item "Start". Enter the
desired start frequency via the keypad followed by [ENT].
{figure 90}