Program Scan - AOR AR7000 Manual

O N : When active signals above the squelch threshold have been received, such
signals will be automatically stored in the empty channels of the designated memory
bank. When the memory bank becomes full, the auto store action will become
invalid, the search process will carry on regardless.
OVW : When active signals above squelch threshold have been received, such
signals will be stored from channel 00 up to channel 99 of the designated memory
bank in sequence. This auto store sequence will continue between channel 00 and
99 overwriting the previously stored data.
OFF : The auto store is inoperative (disabled).
K Store bank (Bank)
Push the [ENT] key when the cursor is placed alongside the item "Bank". Rotate the
main dial or push the [ keys to select the desired memory bank (00 to 14) to
be used for auto store of active frequencies, then press [ENT].
{figure 96}
L Pass bank
Push the [ENT] key when the cursor is placed alongside the item "Pass Bank".
Rotate the main dial or push the [ keys to select the desired pass bank (00 to
14) to be used, alternatively select "- -" to disable the pass facility then press [ENT].
{figure 97}
M Quit
Push the [ENT] key when the cursor is placed alongside the item "Quit". The LCD
will revert to whatever mode was active before the program search menu was
selected.

4.6 Program scan

Press the [SCAN] key in the dial mode or memory mode. The "Program Scan"
menu will be displayed.
{figure 98}
4.6.1 Selection of the program number
There are eight program scan groups. In the program scan menu screen rotate the
main dial to select the desired program scan group number from 0 to 7.
4.6.2 Run