Video Img (Video Modulation Polarity) - AOR AR6000 Operating Manual

2. Press the [DOWN] key several times to select "VIDEO OUTPUT" in reverse contrast.
3. Rotate the sub dial to select on/off.
4. Press the [MHz] key to accept the entry and return to a standard display.
Alternatively, press the [CLR] key to abort entry, or press the [DOWN] key to move to the next item
on the configuration menu.

10-14 VIDEO IMG (VIDEO MODULATION POLARITY)

Note: This function operates with a frequency of 25 MHz or higher.
In some cases, certain FM video signals may be transmitted with an IF frequency reversed, and
consequently, the received video signal cannot be properly decoded.
The AR6000 has a shift direction reverse function to correct the problem.
To activate the video modulation polarity function, perform the following steps:
1. Press the [FUNC] key, and then press the [0] key.
2. Press the [DOWN] key several times to select "VIDEO IMG" in reverse contrast.
3. Rotate the sub dial to select normal or reverse.
4. Press the [MHz] key to accept the entry and return to a standard display.
Alternatively, press the [CLR] key to abort entry, or press the [DOWN] key to move to the next item
on the configuration menu.
11 MISCELLANEOUS FUNCTIONS
11-1 STEP ADJUST
Step adjust function is used when the receiving frequency is not divisible by the current step size to follow
unusual band plans. (It is automatically adjusted in the auto mode.)
(Example):
77