Additional References - Cisco Catalyst 2960-XR Configuration Manual
Switch interface and hardware component
Hide thumbs
Also See for Catalyst 2960-XR:
- Security configuration manual (404 pages) ,
- Configuration manual (196 pages) ,
- Configuration manuals (120 pages)
Table of Contents
Advertisement
Configuring Ethernet Management Port
Command or Action
Step 4
no shutdown
Example:
Switch(config-if)# no shutdown
Step 5
exit
Example:
Switch(config-if)# exit
Step 6
show interfaces fastethernet0
Example:
Switch# show interfaces fastethernet0
What to Do Next
Proceed to manage or configure your switch using the Ethernet management port. Refer to the Catalyst 2960-X
Switch Network Management Configuration Guide.
Additional References
Related Documents
Related Topic
Bootloader configuration
Bootloader commands
MIBs
MIB
All supported MIBs for this release.
OL-29420-01
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
Purpose
Enables the Ethernet management port.
Exits interface configuration mode.
Displays the link status.
To find out the link status to the PC, you can monitor the LED
for the Ethernet management port. The LED is green (on)
when the link is active, and the LED is off when the link is
down. The LED is amber when there is a POST failure.
Document Title
MIBs Link
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs
Additional References
51
Advertisement
Table of Contents
