Enabling Wired Location Service On The Switch - Cisco Catalyst 2960-XR Configuration Manual

Configuring Location TLV and Wired Location Service
Command or Action
Example:
Switch# show location admin-tag
or
Switch# show location civic-location
identifier
or
Switch# show location elin-location
identifier
Step 8
copy running-config startup-config
Example:
Switch# copy running-config
startup-config

Enabling Wired Location Service on the Switch

Beginning in privileged EXEC mode, follow these steps to enable wired location service on the switch.
SUMMARY STEPS
1. configure terminal
2. nmsp notification interval {attachment | location} interval-seconds
3. end
4. show network-policy profile
5. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Switch# configure terminal
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
68
Configuring LLDP, LLDP-MED, and Wired Location Service
Purpose
(Optional) Saves your entries in the configuration file.
Purpose
Enters global configuration mode.
OL-29420-01