Shutting Down And Restarting The Interface - Cisco Catalyst 2960-XR Configuration Manual

Shutting Down and Restarting the Interface

Shutting Down and Restarting the Interface
Shutting down an interface disables all functions on the specified interface and marks the interface as unavailable
on all monitoring command displays. This information is communicated to other network servers through all
dynamic routing protocols. The interface is not mentioned in any routing updates.
SUMMARY STEPS
1. configure terminal
2. interface {vlan vlan-id} | {gigabitethernet interface-id} | {port-channel port-channel-number}
3. shutdown
4. no shutdown
5. end
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 interface {vlan vlan-id} | {gigabitethernet interface-id} |
{port-channel port-channel-number}
Example:
Switch(config)# interface gigabitethernet1/0/2
Step 3
shutdown
Example:
Switch(config-if)# shutdown
Step 4
no shutdown
Example:
Switch(config-if)# no shutdown
Step 5 end
Example:
Switch(config-if)# end
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
34
Configuring Interface Characteristics
Purpose
Enters global configuration mode.
Selects the interface to be configured.
Shuts down an interface.
Restarts an interface.
Returns to privileged EXEC mode.
OL-29420-01