Cisco Catalyst 2960-XR Configuration Manual page 78

Configuring Location TLV and Wired Location Service
SUMMARY STEPS
1. configure terminal
2. location {admin-tag string | civic-location identifier {id | host} | elin-location string identifier id |
custom-location identifier {id | host} | geo-location identifier {id | host}}
3. exit
4. interface interface-id
5. location {additional-location-information word | civic-location-id {id | host} | elin-location-id id |
custom-location-id {id | host} | geo-location-id {id | host} }
6. end
7. Use one of the following:
8. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 location {admin-tag string | civic-location identifier
{id | host} | elin-location string identifier id |
custom-location identifier {id | host} | geo-location
identifier {id | host}}
Example:
Switch(config)# location civic-location
identifier 1
Switch(config-civic)# number 3550
Switch(config-civic)# primary-road-name "Cisco
Way"
Switch(config-civic)# city "San Jose"
Switch(config-civic)# state CA
Switch(config-civic)# building 19
Switch(config-civic)# room C6
Switch(config-civic)# county "Santa Clara"
Switch(config-civic)# country US
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
66
• show location admin-tag string
• show location civic-location identifier id
• show location elin-location identifier id
Configuring LLDP, LLDP-MED, and Wired Location Service
Purpose
Enters global configuration mode.
Specifies the location information for an endpoint.
• admin-tag—Specifies an administrative tag or site
information.
• civic-location—Specifies civic location information.
• elin-location—Specifies emergency location information
(ELIN).
• custom-location—Specifies custom location information.
• geo-location—Specifies geo-spatial location information.
• identifier id—Specifies the ID for the civic, ELIN,
custom, or geo location.
• host—Specifies the host civic, custom, or geo location.
• string—Specifies the site or location information in
alphanumeric format.
OL-29420-01