Paper Trays 1, 2, 3, And 4 - Xerox Docucolor 12 User Manual

Paper Trays 1, 2, 3, and 4 hold the paper supply
for the DocuColor 12 Printer.
Paper Tray 1, illustrated in Figure 1, can
accommodate 8.5 x 11 inch, A4, B5, or A5 paper.
Paper Trays 2, 3, and 4 can accommodate an
assortment of standard paper sizes, from 8 x 10
3
2
inch through 17 x 11 inch, and A3 through B5.
KEY POINT: Paper Trays 2, 3, and 4 can handle
normal weight papers from 16 lb. - 28 lb. (64 - 105
gsm) and also limited heavyweight papers from
105 - 128 gsm. The heaviest standard paper that
can be run in Trays 2, 3, and 4 is 32 lb bond (128
gsm). To run papers heavier than 105 gsm (28 lb
3 bond) one of the trays must be specifically set to
"Heavyweight" in Tools mode. Refer to the Tray
Management section of the DocuColor 12 Printer
System Administration Guide.
Trays 2, 3, and 4 have width and length
adjustment guides that should be adjusted if the
paper size in the tray needs to be changed.
NOTE: Paper Trays 2, 3, and 4 can also
4
accommodate 12 x 18 inch paper through a
special, optional tray setup procedure performed
by a Xerox service representative. If you are
interested in this capability, contact your Xerox
service representative.
Refer to the Recommended Materials List and the
Color Materials Usage Guide for more information
about the materials you can use in Paper Trays 1,
5
2, 3, and 4.
6
7

Paper Trays 1, 2, 3, and 4

Tray 1
Trays 2, 3, 4
3–2
Figure 1: Paper Trays
DOCUCOLOR 12 PRINTER USER GUIDE