Xerox Docucolor 12 User Manual page 89

6 If the paper jam is in the Fuser Exit Area, locate
the Fuser Exit Area handle at the right of the
Paper Path Module. Move the handle to the right
and carefully remove the jammed paper. Gently
secure the handle back into place.
7
In the Duplex Path, areas 3 and 4, press the
handles down gently to release the Aligner Baffle
(left handle) and Duplex In baffle (right handle).
8
Remove the jammed paper and secure the
handles back in place.
9
Firmly push in the Paper Path Module until it is in
place. Turn the green handle counterclockwise to
lock the module.
DOCUCOLOR 12 PRINTER USER GUIDE
Figure 12: Fuser Exit area
Area 3
Area 4
Figure 13: Duplex Path Areas
Figure 14: Rotating the green handle
5–9
counterclockwise
PROBLEM SOLVING
1
3
4
5
5
6
7