Xerox Docucolor 12 User Manual page 53

2 Place the stack of materials onto Paper Tray 5
between the edge guides. Slide the stack into the
tray until it stops.
3 Move the back edge guide until it lightly touches
the side of the stack of materials. Readjust the
back edge guide each time you load materials into
Paper Tray 5.
4
Select the appropriate size and type for the stock
you have loaded. Refer to the Tray 5 Setup screen
for more information.
NOTE: Adjust the front edge guide only for 12" x
18" paper. Refer to Using 12 x 18 inch or SRA3
Paper in this manual for additional information.
NOTE: Remove all stock from Paper Tray 5
when the job is complete. Dust and moisture can
affect stock, causing print quality defects.
DOCUCOLOR 12 PRINTER USER GUIDE
Edge guides
Figure 13: Loading paper into Paper Tray 5
3–11
1
3
3
4
5
6
7