Replacing The Video Card/Thermal-Cooling Assembly - Dell XPS M2010 Service Manual

Replacing the Video Card/Thermal-Cooling Assembly
1. Align the video card/thermal-cooling assembly over the connector and screw holes on the system board.
2. Press down on the "PUSH HERE" label on the video card/thermal-cooling assembly.
3. Tighten in consecutive order the four captive screws, labeled "1" through "4", on the video card/thermal-cooling assembly.
4. Connect the video cable to the connector on the video card.
5. Replace the right hard drive (see
6. Replace the top cover (see
7. Replace the cosmetic covers (see
NOTICE: To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving the computer.
8. Firmly attach the keyboard to the computer and close the display (see
9. Turn the computer upside down and replace the system battery (see
Back to Contents Page
Replacing a Hard Drive).
Replacing the Top Cover).
Replacing the Cosmetic Covers).
Closing the Display).
Replacing the System Battery).