1
drive-release latch
8. Attach the power and data cables to the CD/DVD drive.
To locate the system board connector, see
1
power cable
9. Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.
10. Replace the drive panel (see
11. Replace the computer cover (see
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it in to the computer.
12. Connect your computer and devices to electrical outlets, and then turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
13. Enter system setup (see
Entering System
Processor Airflow Shroud
CAUTION:
Before you perform this procedure, follow the safety instructions located in the Product Information Guide.
2
CD/DVD drive
System Board
Components.
2
data cable
Installing the Drive
Panel).
Replacing the Computer
Cover).
Setup) and select the appropriate Drive option.