Table of Contents
Advertisement
Back to Contents Page
Video Card/Thermal-Cooling Assembly
Dell™ Inspiron™ 6400/E1505 Service Manual
Removing the Video Card/Thermal-Cooling Assembly
Replacing the Video Card/Thermal-Cooling Assembly
NOTE:
A removable video card is optional and present only if ordered by the customer. Standard video is integrated on the system board and is not
customer removable.
Removing the Video Card/Thermal-Cooling Assembly
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
computer.
1. Follow the instructions in
Before Working Inside Your
2. Remove the hinge cover (see
3. Remove the keyboard (see Keyboard).
4. Remove the display assembly (see
5. Remove the palm rest (see
NOTE:
Remove the video card/thermal-cooling assembly as a single unit. Do not separate the thermal-cooling assembly from the video card.
6. Remove the video card/thermal-cooling assembly:
a. Loosen the two captive screws that secure the video card/thermal-cooling assembly and remove it from the system board.
1
video card/thermal-cooling assembly
Replacing the Video Card/Thermal-Cooling Assembly
1. Carefully align the video card/thermal-cooling assembly over the connector on the system board and press down.
NOTE:
The video card/thermal-cooling assembly is labeled "PUSH HERE."
2. Tighten the two captive screws on the video card/thermal-cooling assembly.
Computer.
Removing the Hinge
Cover).
Removing the Display
Assembly).
Removing the Palm
Rest).
2
captive screws (2)
Before Working Inside Your
Computer) before working inside the
Hide quick links:
Advertisement
Table of Contents
