Dell XPS M2010 Service Manual page 22

Replacing a Mini Card
NOTICE: To avoid damaging the card, ensure that the antenna cable is not under the card when you click the card into place.
NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.
1. Align the card with the system board connector at a 45-degree angle, and press down to insert the card into the connector.
2. Connect the antenna cables to the antenna connectors on the mini card. Connect the white cable to the connector with the white arrow, and connect
the black cable to the connector with the black arrow.
NOTE: If your computer has a gray cable, connect it to the connector with the gray arrow if one is available on your card.
1 white arrow 2
4 mini card
3. Replace the memory module cover (see
4. Replace the system battery (see
Back to Contents Page
black arrow 3 antenna cables
Replacing the Memory Module).
Replacing the System Battery).