To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
8. Connect your computer and devices to electrical outlets, and then turn them on.
Installing a Media Card Reader
1. Follow the procedures in
Before You
2. Remove the computer cover (see
3. Remove the drive panel (see
4. Remove the existing media card reader, if applicable (see
5. If no screws are attached to the Media Card Reader, check the inside of the drive panel for shoulder screws. If screws are present, attach the screws to
the new card reader.
1
media card reader
6. Slide the Media Card Reader into the drive bay until it clicks into place.
1
drive-release latch
7. Attach the power and data cables to the back of the Media Card Reader.
8. Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan and cooling vents.