Dell XPS M2010 Service Manual page 114

Auto Power Time
Suspend Mode
(S3 default)
Maintenance
Service Tag
Load Defaults
Event Log
POST Behavior
Fastboot
(On default)
Numlock Key
(On default)
POST Hotkeys
(Setup & Boot Menu default)
Keyboard Errors
(Report default)
NOTE: This feature does not work if you turn off your
computer using a power strip or surge protector.
Specifies the time to automatically turn on the
computer.
Change the time to automatically turn on the
computer by pressing the up- or down-arrow key to
increase or decrease the numbers, or type the
numbers in the appropriate time field.
NOTE: This feature does not work if you turn off your
computer using a power strip or surge protector.
Specifies the power management suspend mode.
S1 — The computer resumes more quickly from
l
sleep mode.
S3 — The computer conserves more power
l
when not in use (system memory remains
active).
Displays the system service tag.
This setting restores the computer's factory-installed
default settings.
Cancel — Do not restore factory-installed
l
default settings.
Continue — Restore factory-installed default
l
settings.
Displays the system event log.
Mark all entries — Mark all event log entries
l
as read (R).
Clear log — Clear all event log entries.
l
NOTE: Once an event log entry is marked as read (R)
that entry cannot be marked as unread (U).
Enables or disables the option to speed up the boot
process by skipping some compatibility tests.
Off — Do not skip any steps in the boot
l
process.
On — Boot quickly.
l
Enables or disables the numerical and mathematical
features of the rightmost bank of keys on the
keyboard.
Off — Right keypad keys function as arrows.
l
On — Right keypad keys function as numbers.
l
Specifies the function keys to display on the screen
when the computer starts.
Setup & Boot Menu — Display both messages
l
(F2=Setup and F12=Boot Menu).
Setup — Display the setup message only
l
(F2=Setup).
Boot Menu — Display the Quickboot message
l
only (F12=Boot Menu).
None — Neither message is displayed.
l
Enables or disables keyboard error reporting when
the computer starts.
Report — Display any keyboard errors.
l
Do not report — Do not display any keyboard
l
errors.