1
M2.0-mm shoulder screws (4)
3. Lift the optical drive out of the assembly.
4. Remove the two drive rails from the optical drive by removing the two M2 x 3-mm screws in each drive rail.
1
optical drive rails (2)
2
5. Remove the optical drive cable from the optical drive by removing the two M2 x 3-mm screws.
6. Remove the four M2.0-mm shoulder screws on the optical drive cover.
7. Slide the top cover away from the front bezel to disengage the tabs, and lift the drive cover off the drive.
8. Remove the media from the drive.
1
M2.0-mm shoulder screws (4)
2
optical drive
3
optical drive assembly
optical drive
3
M2 x 3-mm screws on rails (4)
2
optical drive
3
front bezel