Dell XPS M2010 Service Manual page 5

connectors on the card and on the back of the computer when
setting up multiple network connections (such as a separate intra-
and extranet).
NOTE: It is recommended that you use Category 5 wiring and
connectors for your network. If you must use Category 3 wiring,
force the network speed to 10 Mbps to ensure reliable operation.
3 network activity Flashes a yellow light when the computer is transmitting or receiving
light network data. A high volume of network traffic may make this light
appear to be in a steady "on" state.
4 keyboard Plug a standard PS/2 keyboard into the purple keyboard connector.
connector Turn off the computer and any attached devices before you connect
a keyboard to the computer. If you have a USB keyboard, plug it into
a USB connector.
5 mouse connector Plug a standard PS/2 mouse into the green mouse connector. Turn
off the computer and any attached devices before you connect a
mouse to the computer. If you have a USB mouse, plug it into a USB
connector.
6 side surround Use the (silver) side surround connector to attach additional
sound connector speakers.
7 center Use the (orange) subwoofer connector to attach a single subwoofer.
subwoofer/LFE
connector
NOTE: The LFE (Low Frequency Effects) Audio channel, found in
digital surround sound audio schemes, carries only low frequency
information of 80 Hz and below. The LFE channel drives a subwoofer
to provide extremely low bass extension. Systems not using
subwoofers can shunt the LFE information to the main speakers in
the surround sound setup.
8 surround sound Use the (black) surround sound connector to attach multichannel-
connector capable speakers.
9 line-in connector Use the (blue) line-in connector to attach a record/playback device
such as a cassette player, CD player, or VCR.
On computers with a sound card, use the connector on the card.
10 line- Use the (green) line-out connector to attach headphones and
out/headphone speakers with integrated amplifiers.
connector
On computers with a sound card, use the connector on the card.
11 microphone Use the (pink) microphone connector to attach a personal computer
connector microphone for voice or musical input into a sound or telephony
program.
12 S/PDIF connector Use the S/PDIF connector to transmit digital audio without going
through an analog audio conversion process.
13 serial connector Connect a serial device, such as a handheld device, to the serial
port. If necessary, the address for this port can be modified through
system setup (see
14 USB 2.0 Use the back USB connectors for devices that typically remain
connectors (6) connected, such as printers and keyboards.
NOTE: It is recommended that you use the front USB connectors for
devices that you connect occasionally, such as flash memory keys,
cameras, or bootable USB devices.
15 IEEE 1394 Use the IEEE 1394 connector for high-speed data devices such as
connector digital video cameras and external storage devices.
Back to Contents Page
System Setup).