When working on the display, be careful not to touch the camera. The glass on the camera is fragile.
17. Starting at the top of the panel, remove the black display bezel from around the LCD panel by carefully prying it loose.
1
black display bezel
18. On the silver display inlay, remove four M2.5 x 5-mm screws from the holes labeled "A" and twelve M2.5-mm shoulder screws from the remaining holes.
1 M2.5 x 5-mm screws (4)
2 M2.5-mm shoulder screws (12)
19. Starting at the top of the panel, remove the silver inlay from around the LCD panel by carefully prying it loose.
20. On the rails that hold the LCD panel to the display, remove four M2 x 3-mm screws from the left rail, four M2 x 3-mm screws from the right rail, and two
M2 x 3-mm screws from the bottom rail.
NOTE:
Do not remove the screws that hold the display latches in place.