Replacing The Subwoofer - Dell XPS M2010 Service Manual

1 subwoofer cable and system
board connector
10. To easily access the bottom of the computer, lean the display backwards and lay it on a flat surface so that the base is facing you.
1 computer base
11. Push the subwoofer through the top of the computer to remove the subwoofer from its compartment.
12. Detach the internal card with Bluetooth wireless technology (see
cable aside to adhere them to the new subwoofer.
Replacing the Subwoofer
1. Adhere the card with Bluetooth wireless technology (with cable attached) to the new subwoofer.
2. Insert the new subwoofer into the computer base, pushing it firmly into place.
Ensure that the subwoofer cable reaches through to the system board.
3. Slide the subwoofer cover into place, and attach the subwoofer cover to the battery bay using two M2 x 4-mm screws.
4. Lift the display and place the computer base flat on the work surface.
5. Connect the subwoofer cable to the connector on the system board (JWOFR).
6. Connect the cable for the internal card with Bluetooth wireless technology to the connector on the system board (JBT).
7. Replace the top cover (see
8. Replace the cosmetic covers (see
NOTICE: To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving the computer.
2 cable for the card with Bluetooth technology and
system board connector
2 subwoofer
Removing the Top Cover).
Removing the Cosmetic Covers).
3 display
Removing the Internal Card with Bluetooth Wireless Technology). Set the card and