Dell XPS M2010 Service Manual page 63

1 release tab 2 card retainer
4 fan bracket
5. Remove the filler bracket or existing card (see
6. Prepare the card for installation.
See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your
computer.
7. Position the card so that it is aligned with the slot and the securing tab (if present) is aligned with the securing slot.
NOTE: If the card is full-length, insert the card guide into the alignment slot on the fan bracket.
1 PCI Express x16 card 2
NOTICE: Ensure that you release the securing tab to seat the card. If the card is not installed correctly, you may damage the system board.
8. Gently pull the securing tab (if present) and place the card in the connector. Press down firmly and ensure that the card is fully seated in the slot.
1 card connector (seated)
3 alignment guide
Removing PCI and PCI Express
securing tab 3 PCI Express x16 card slot
2 card connector (not 3 bracket properly aligned
Cards) to create a card- slot opening.