Dell XPS M2010 Service Manual page 36

9. Seat the computer base onto the hinge arms, aligning the screw holes in the computer base with those in the hinge arms.
10. Attach the right and left hinge arms to the base using six M2.5 x 8-mm screws.
11. Connect the solenoid cable to the solenoid card. Thread the cable through the notch and under the frame as shown below.
1 opening on the base
12. Replace the video card/thermal-cooling assembly (see
13. Replace the right hard drive (see
14. Replace the right fan (see Replacing a System
15. Replace the top cover (see
16. Replace the cosmetic covers (see
NOTICE: Ensure that you attach the keyboard securely to avoid damage to the keyboard.
17. Firmly reattach the keyboard to the computer and close the display (see
18. Turn the computer upside down.
19. Connect the antenna cables from the mini card.
20. Connect the speaker cable to the connector on the system board (JSPK).
21. Connect the suspend and solenoid function cable to the connector on the system board (JHING).
22. Connect the infrared sensor cable to the connector on the system board (JCIR).
23. Replace the memory module cover (see
24. Replace the system battery (see
Back to Contents Page
2 solenoid cable
Replacing the Video Card/Thermal-Cooling
Replacing a Hard Drive).
Fan).
Replacing the Top Cover).
Replacing the Cosmetic Covers).
Replacing the Memory
Replacing the System Battery).
3 solenoid card
Closing the Display).
Module).
Assembly).