Flow Control - Intel GS-SR168 System Installation Manual

GS-SR168 Rack Mount Server
Com Port Address
If this option is set to enabled, it will use a port on the motherboard.
On-board COMA
On-board COMB
Disabled
Baud Rate
This option allows user to set the specified baud rate.
Options
Console Type
This option allows user to select the specified console type. This is defined by IEEE. PC-ANSI
is the standard PC-type terminal. Note that for VT100+, you must select English as your
languuage. And VT-UTF8 uses unicode.
Options

Flow Control

Enables Flow Control when EMP is dahring the same serial port as console redirection, the flow
control must be set to CTS/RTS or CTS/RTS+CD depending on whether a modem is used.
None
XON/OFF
CTS/RTS
Continue C.R. after POST
This option allows user to enable console redirection after O.S has loaded.
On
Enable console redirection after O.S has loaded.
Off Disable this function. (Default value)
Use COMA as he COM port address.
Use COMB as he COM port address.
Disable this function. (Default value)
300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K.
vt100, vt100+, vt100 8bit, PC ANSI 7bit, PC-ANSI, VT-UTF8.
Not supported.
Software control.
Hardware control. (Default values)
4 4