Program Initialization; Initializing All Programs; Initializing A Single Program - Brother LH4-B800E Instruction Manual

12. PROGRAM INITIALIZATION

12-1. Initializing all programs

1. While pressing the RESET key (3), turn on the power switch.
All LEDs on the operation panel will illuminate and the buzzer will sound continuously for 8 seconds.
2. Once all programs have been initialized, [- -] and [- - - -] will appear in the program number LED (6) and
the parameter display LED (14) respectively.
Settings which are initialized
1. Parameters
2. Memory switches
3. Production counter and lower thread counter
* If any cycle programs have been set, they will also be erased.
3. Return the sewing machine to the home position
(Refer to "5-2. Home position return (preparation)".)

12-2. Initializing a single program

1. Select the number of the program to be initialized, and then turn off the power.
2. While pressing the CUTTER ON key (5), turn on the power switch.
The number of the program that will be initialized will appear in the program number LED (6), and then all
other LEDs will illuminate and the buzzer will sound four times.
3. When all parameters of the selected program have been initialized, and [- -] and [- - - -] will appear in the
program number LED (6) and the parameter display LED (14) respectively.
Settings which are initialized
1. Parameters
4. Return the sewing machine to the home position.
(Refer to "5-2. Home position return (preparation)".)
(3)
(6)
(5)
HE-8000
12. PROGRAM INITIALIZATION
(14)
2189Q
79