Brother LH4-B800E Instruction Manual page 88

Panel DIP switch table
DIPSWA
No.
Work clamp remains lowered after sewing is complete (lifts when pedal is
ON
1 depressed)
OFF
Work clamp lifts after sewing is complete
ON –
2
OFF –
ON
Emergency stop using work clamp lifter switch enabled during automatic sewing
3
OFF
Emergency stop using work clamp lifter switch disabled during automatic sewing
ON
Display setting during automatic mode = lower thread counter (Default: 100)
4
OFF
Display setting during automatic mode = production counter (Default: 0)
2-cycle sewing ON
(All programs will be set to 2-cycle sewing regardless of the setting for
ON
5
parameter No. 55.)
OFF 2-cycle sewing OFF
ON –
6
OFF –
ON
Upper thread breakage detection disabled
7
OFF
Upper thread breakage detection enabled
ON
Programs disabled
8
OFF
Programs enabled
DIPSWB
No.
ON
1
OFF
ON
2
OFF
ON, ON, ON
ON, ON, OFF
ON, OFF, ON
ON, OFF, OFF
3, 4, 5
OFF, ON, ON
OFF, ON, OFF
OFF, OFF, ON
OFF, OFF, OFF Panel DIP switches B-7 and B-8 are enabled.
ON
6
OFF
ON, ON
ON, OFF
7, 8
OFF, ON
OFF, OFF
* If the programs are initialized when Nos. 3, 4 and 5 are set to OFF, OFF and ON (Work clamp size: 5.4 ×
19 mm [Sewing area: 4.0 × 15 mm]) respectively, the initial value for parameter No. 02 - Cutter size will
be set to 6.0.
13. CHANGING FUNCTIONS USING THE DIP SWITCHES
–
–
–
–
Work clamp size: 7.3 × 75 mm (Sewing area: 6.0 × 70 mm)
Work clamp size: 7.3 × 36 mm (Sewing area: 6.0 × 32 mm)
Work clamp size: 7.3 × 24.5 mm (Sewing area: 6.0 × 20 mm)
Work clamp size: 6.8 × 36 mm (Sewing area: 5.4 × 32 mm)
Work clamp size: 6.8 × 24.5 mm (Sewing area: 5.4 × 20 mm)
Panel DIP switches B-7 and B-8 are enabled.
Work clamp size: 5.4 × 19 mm (Sewing area: 4.0 × 15 mm)
Needle plate size: 5.4 mm (Max. needle zigzag feed width = 4.0 mm)
Needle plate size: 7.3 mm (Max. needle zigzag feed width = 6.0 mm)
Work clamp size: 7.3 × 47 mm (Sewing area: 6.0 × 40 mm)
Work clamp size: 6.8 × 47 mm (Sewing area: 5.4 × 40 mm)
Work clamp size: 5.4 × 24.5 mm (Sewing area: 4.0 × 20 mm)
Work clamp size: 5.4 × 36 mm (Sewing area: 4.0 × 32 mm)
Setting item
Setting item
HE-8000
Default
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
Default
OFF
OFF
OFF, OFF, OFF
OFF
OFF, OFF
81