Connecting The Motor Harness - Brother LH4-B800E Instruction Manual

4-11-3. Connecting the motor harness

(3)
(8)
(7)
(6)
1. Pass the motor harness (1) through the rubber
cushion (2).
2. Connect the connectors (3).
3. Secure the motor harness (1) with staples.
(1)
(2)
2063Q
4. Connect the connectors of the feed motor harness
(4) and the presser foot motor harness (5). In the
same way, connect the connectors for the cutter
solenoid harness (6), the DC fan motor harness (7)
and the cutter home position sensor harness (8).
(4)
(5)
(6)
(7)
(8)
( )
4
(5)
2064Q
5. Connect the connectors of the zigzag motor
harness (9) and the tension release solenoid
harness (10).
Take note of how these two harnesses are routed
through the control box so as not to confuse them
with any of the other harnesses.
(9)
(10)
(9)
(10)
2065Q
HE-8000
Harness
Feed motor<5-pin>(White)
Presser foot motor<5-pin>
(Blue)
Cutter solenoid<6-pin>
Fan<3-pin>
Cutter home position sensor
<12-pin>
Harness
Zigzag motor <6-pin>
Tension release solenoid
<6-pin>
4. INSTALLATION
Sub P.C.board
Mark
indication
S2 P2<FDPM>
S5 P5<FTPM>
S8 P8<CUTTER>
- P10<FAN1>
S7 P7<OPSEN2>
Main P.C.board
Mark
indication
M16 P16<NPM >
M19 P19<OPSOL>
15