Download  Print this page

Changing The Production Counter - Brother LH4-B800E Instruction Manual

E series electronic lockstitch button holer.
Hide thumbs


5-4-8. Changing the production counter

• Check that panel DIP switch SW-A4 is at the OFF setting. (Refer to "13. Changing functions using the
DIP switches".)
1. Press the SELECT key (13) to change the mode
to automatic mode.
2. Press the parameter UP key (15) and the para-
meter DOWN key (16) simultaneously.
("PC" will flash in the program number LED (6).
The current production counter setting will appear
in the parameter display LED (14).)
3. Use the parameter keys (15) and (16) to change
the production counter, and then press the
ENTER key (17).
(The production counter setting will flash in the
parameter display LED (14) while the setting is
being changed. When the ENTER key (17) is
pressed, the setting value will be changed, the
parameter display LED (14) will stop flashing and
the mode will change to automatic mode.)
* If you press the SELECT key (13) while the
display is flashing, the mode will change to
automatic mode without changing the produc-
tion counter setting.
* If you press the RESET key (3), the production
counter will change to 0, and this change will
be accepted when the ENTER key (17) is


Table of Contents

   Also See for Brother LH4-B800E

   Related Manuals for Brother LH4-B800E

This manual is also suitable for:


Comments to this Manuals

Symbols: 0
Latest comments: