Changing Program Details - Brother LH4-B800E Instruction Manual

5-4-3. Changing program details

(7)
(8)
(6)
(6)
(7)
(8)
(13) (17)
(17)
(13)
Example 1:
1. Press the SELECT key (13) to change the mode
to automatic, test feed or manual mode. Use the
program No. keys (7) and (8) to select the
program number (example: program number 3),
and then press the ENTER key (17).
2111Q
(When you press the ENTER key (17), the program
number will be accepted and the program number
LED (6) will stop flashing. The program number will
not be accepted if the ENTER key (17) is not
pressed.)
2112Q
2. Press the SELECT key (13) to change the mode
to program mode.
• The parameters for the program number which
was selected in step 1 will appear.
(14)
• The parameter number will appear in the
program number LED (6).
• The parameter setting value will appear in the
parameter display LED (14).
2113Q
3. Use the program No. keys (7) and (8) to select
the number for the parameter to be changed.
(Example: Button hole/bar tack setting - Parameter
No. 01)
2114Q
HE-8000
5. OPERATION
This example shows how to make a
buttonhole (round) setting for program
number 3.
43