Brother LH4-B800E Instruction Manual page 61

5. OPERATION
The program numbers for patterns which have been created using the BAS-PC/300 range from P1 to P9.
However, program numbers which have not yet been assigned to a program will not appear on the program
number LED.
→ → → → 1 → → → → 2 → → → → 3 → → → → ..... → → → → 90→ → → → P1 → → → → P2 → → → → ...... → → → → P9 → → → → 1 → → → → 2 → → → → ......
You can check and change the following parameters for patterns which have been created using the BAS-
PC/300.
No. Setting items
00 Sewing speed (zigzag part)
02 Length of knife
08 Knife X position alignment
09 Knife Y position alignment
16 Running speed (Straight bar tack)
48 Underlay speed
60 Slow speed
61 Rear tack speed
62 Front tack speed
54
Setting range
1,000 - 4,000 rpm
Value is for checking purposes and
cannot be changed.
-0.5 - 0.5 mm
-0.8 - 0.8 mm
1,000 - 3,000 rpm
1,000 - 3,000 rpm
500 - 1,500 rpm
500 - 4,000 rpm
500 - 4,000 rpm
HE-8000
Unit Default
100 3,600
- -
0.1 0.0
0.1 0.0
100 2,000
100 2,000
100 800
100 4,000
100 4,000