Connecting The Motor Harness - Brother HE-800A Instruction Manual

４-１１-３. Connecting the motor harness
1. Pass the motor harness (1) through the cord bush
(2).
2. Connect the connectors (3).
3. Secure the motor harness (1) with staples.
3869Q
4. Securely insert each of the connectors (4) – (8) as
indicated below.
Harness
Feed motor
(4)
<5-pin>(White)
Presser foot motor
(5)
<5-pin> (Blue)
Cutter solenoid
(6)
<6-pin>
Fan <3-pin>
(7)
Cutter home position
(8)
sensor <12-pin>
3870Q
5. Securely insert the connectors (9) and (10) as
indicated below.
Note:
Take note of how these two harnesses are routed
through the control box so as not to confuse them
with any of the other harnesses.
Harness
Zigzag motor
(9)
<6-pin>
Tension release
(10)
solenoid <6-pin>
3871Q
HE-800A
4. INSTALLATION
Sub P.C. board
Mark
indication
S2 P2 FDPM
S5 P5 FTPM
S8 P8 CUTTER
- P10 FAN1
S7 P7 OPSEN2
Main P.C. board
Mark
indication
P16 NPM
M16
M19 P19 OPSOL
14