Memory Recall - Konica Minolta DI2510 Advanced Information

4

Memory Recall

After printing of a copy job is finished, the image that was just copied can
be printed again without the document being loaded.
Note
The memory recall feature is only available if the "Memory Recall"
function (a User's Choice function in the Utility mode) is set to "ON".
For details, refer to "User's Choice screen" on page 7-1.
Tip
The memory recall feature cannot be used if any of the following have
occurred:
A new document has been scanned. (The [Start] key has been
pressed.)
The copier has been turned off.
The [Panel Reset] key was pressed while printing was stopped.
4-24
Before Making Copies
Di2510/Di3010/Di3510