Konica Minolta DI2510 Advanced Information page 295

Touch Panel Messages
6
Lower lever "FN3", and then pull out
any misfed paper.
7
Return lever "FN1" and lever "FN3"
to their original position.
8
If the punch kit is installed:
Insert the punch box into its original
position.
9
Lower lever "FN4".
10
Turn dial "FN5" or dial "FN6", and
then pull out any misfed paper.
11
Return lever "FN4" to its original
position.
12
Turn the dial to the left to move the
stapler toward the front.
Di2510/Di3010/Di3510
12
12-29