Before Making Copies; Names Of Control Panel Parts And Their Functions - Konica Minolta DI2510 Advanced Information

Before Making Copies

4 Before Making Copies
4.1

Names of Control Panel Parts and Their Functions

13
14
15
16
17
No. Part Name
1 Touch panel
2 Extra Scan key
3 Scan key
4 Copy key
5 Sub power switch
6 Access key
7 Interrupt key
8 Panel Reset key
9 [C] (clear) key
. . . continued on next page
Di2510/Di3010/Di3510
1 2
12
Function
Displays various screens and messages
Touch items in the touch panel to select screens and
specify settings.
Press to use the IP Scanner functions.
(Internet Fax & Network Scan Kit and Network Interface
Card must be installed.)
Press to enter Scan mode.
(Network Interface Card, and either Network Scan Kit or
Internet Fax & Network Scan Kit must be installed.)
Press to enter Copy mode.
Use to turn the copier on and off.
Press when an access code must be entered.
• If the "Copy Track Mode" parameter is set to "OFF",
nothing happens when this key is pressed.
• Press to enter Interrupt mode.
• To cancel Interrupt mode, press the [Interrupt] key
again.
Press to reset all modes and functions to their default
settings.
• Press to reset the number of copies to "1".
• Press to erase a setting (such as the zoom ratio or
size) selected using the 10-Key Pad.
3 4
11 10 9 8
4
5
6
7
4-1