Specifying A Zoom Setting - Konica Minolta DI2510 Advanced Information

Specifying Copy Settings
11.2

Specifying a Zoom Setting

Copies of documents can be enlarged or reduced.
In the touch panel, touch [Basics], and then touch [Zoom]. A screen
appears, showing the available Zoom settings.
There are eight ways to change the zoom ratio.
G
Auto Size
The most appropriate zoom ratio based on the size of the document
loaded and the specified paper size is automatically selected.
G Full-Size
A copy that is the same size as the document (× 1.000) is selected.
G Enlarge
Various zoom settings for making enlarged copies from common
standard document sizes to standard paper sizes are available.
For example:
H
An A4-size document can be copied onto the larger A3-size paper.
H A B4-size document can be copied onto the larger A3-size paper.
G
Reduce
Various zoom settings for making reduced copies from common
standard document sizes to standard paper sizes are available.
For example:
H An A3-size document can be copied onto the smaller A4-size paper.
H A B4-size document can be copied onto the smaller A4-size paper.
G Minimal
The copy is slightly reduced (× 0.930).
H
Selecting the "Minimal" setting ensures that any part of the original
positioned at the edge of the page will not be cut off in the copy.
H The zoom ratio of the "Minimal" setting can be changed to any ratio
between × 0.900 and × 0.999.
G
Zooming
Any zoom ratio (between × 0.250 and × 4.000) can be specified.
Di2510/Di3010/Di3510
11
11-13