Components And Their Functions - Konica Minolta DI2510 Advanced Information

Introduction
1.5

Components and Their Functions

6
5
No. Part Name
1 Duplexing Document
Feeder AFR-19
(optional)
2 Original Cover Kit OC-6
(optional)
3 Copy Desk CD-4M
(optional)
4 Large Capacity Cabinet
PF-122 (optional)
5 2 Way Paper Feed
Cabinet
PF-210 (optional)
6 Job Separator JS-203
(optional)
7 Duplex Unit AD-16
8 Switchback Unit SB-1
Di2510/Di3010/Di3510
1
8
7
Description
Automatically feeds one document sheet at a time for
scanning, and automatically turns over double-sided
documents for scanning
Referred to as the "duplexing document feeder"
throughout the manual.
Presses down on the loaded document to keep it in
place
Referred to as the "original cover" throughout the
manual.
The copier can be placed on the copy desk.
Using the copy desk allows the copier to be set up on the
floor.
Referred to as the "copy desk" throughout the manual.
A large-capacity paper supply cassette that can supply
2,500 sheets of paper.
Referred to as the "large capacity cabinet" throughout
the manual.
A two-level paper supply tray. Each paper supply tray
can hold up to 500 sheets of paper.
Referred to as the "paper feed cabinet" throughout the
manual.
Allows printed pages to be separated
Pull the lever when taking out the paper.
• In order to use the job separator, the switchback unit
must be installed.
Automatically turns the pages over, and prints on both
sides. Referred to as the "duplex unit" throughout the
manual. When using the duplex unit, the switchback unit
is required.
When copying to both sides of a page, this turns over the
paper. Required when using the duplex unit.
2
3
1
4
1-7