ZyXEL Communications P-660HN-T1H User Manual page 224

Chapter 21 Tools
If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 108 Configuration Upload Error
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the ZyXEL Device to its factory defaults. The following warning screen
appears.
Figure 109 Reset Warning Message
Figure 110 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory
defaults of your ZyXEL Device. Refer to Section 1.6 on page 25 for more
information on the RESET button.
224
P-660HN-T1H User's Guide