Wep Encryption - ZyXEL Communications P-660HN-T1H User Manual

Note: If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 43 Network > Wireless LAN > AP: No Security
The following table describes the labels in this screen.
Table 27 Network > Wireless LAN > AP: No Security
LABEL
Security
Mode

8.2.2 WEP Encryption

Use this screen to configure and enable WEP encryption. Click Network >
Wireless LAN to display the AP screen. Select Static WEP from the Security
Mode list.
Note: WEP is extremely insecure. Its encryption can be broken by an attacker, using
widely-available software. It is strongly recommended that you use a more
effective security mechanism. Use the strongest security mechanism that all the
wireless devices in your network support. For example, use WPA-PSK or
WPA2-PSK if all your wireless devices support it, or use WPA or WPA2 if your
wireless devices support it and you have a RADIUS server. If your wireless
devices support nothing stronger than WEP, use the highest encryption level
available.
Figure 44 Network > Wireless LAN > AP: Static WEP
P-660HN-T1H User's Guide
DESCRIPTION
Choose No Security from the drop-down list box.
Chapter 8 Wireless LAN
105