Finding Out More
See
Section 7.6 on page 95
7.1.3 Before You Begin
Find out the MAC addresses of your network devices if you intend to add them to
the DHCP Client List screen.
7.2 The LAN IP Screen
Use this screen to set the Local Area Network IP address and subnet mask of your
ZyXEL Device. Click Network > LAN to open the IP screen.
Follow these steps to configure your LAN settings.
Enter an IP address into the IP Address field. The IP address must be in dotted
1
decimal notation. This will become the IP address of your ZyXEL Device.
Enter the IP subnet mask into the IP Subnet Mask field. Unless instructed
2
otherwise it is best to leave this alone, the configurator will automatically compute
a subnet mask based upon the IP address you entered.
Click Apply to save your settings.
3
Figure 35 Network > LAN > IP
P-660HN-T1H User's Guide
for technical background information on LANs.
Chapter 7 LAN Setup
89