Configuring The Lan Ip Alias Screen - ZyXEL Communications P-660HN-T1H User Manual

Chapter 7 LAN Setup
The following figure shows a LAN divided into subnets A, B, and C.
Figure 39 Physical Network & Partitioned Logical Networks
Ethernet
Interface

7.5.1 Configuring the LAN IP Alias Screen

Use this screen to change your ZyXEL Device's IP alias settings. Click Network >
LAN > IP Alias to open the following screen.
Figure 40 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 25 Network > LAN > IP Alias
LABEL
IP Alias 1
IP Address
IP Subnet Mask
94
DESCRIPTION
Select the check box to configure another LAN network for the ZyXEL
Device.
Enter the IP address of your ZyXEL Device in dotted decimal notation.
Alternatively, click the right mouse button to copy and/or paste the IP
address.
Your ZyXEL Device will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the ZyXEL Device.
A: 192.168.1.1 - 192.168.1.24
B: 192.168.2.1 - 192.168.2.24
C: 192.168.3.1 - 192.168.3.24
P-660HN-T1H User's Guide