10.2 The Firewall Screen
Use this screen to enable firewall and/or SPI. Click Advanced Setup > Firewall
to display the following screen.
Figure 72 Advanced Setup > Firewall
The following table describes the labels in this screen.
Table 49 Advanced > Firewall
LABEL
Firewall
SPI
SAVE
CANCEL
Enabling SPI blocks all traffic initiated from the WAN side,
including the DMZ, virtual server and ACL on the WAN side.
P-660HN-T1H User's Guide
DESCRIPTION
Use this field to enable or disable firewall on your ZyXEL Device.
Use this field to enable or disable SPI on your ZyXEL Device.
Click this to save your changes.
Click this to restore your previously saved settings.
Chapter 10 Firewall
151