The Telnet Screen - ZyXEL Communications P-660HN-T1H User Manual

Chapter 16 Remote Management
The following table describes the labels in this screen.
Table 63 Advanced > Remote Management > WWW
LABEL
Server Port
Server Access
Secured Client
IP Address
Apply
Cancel

16.3 The Telnet Screen

You can use Telnet to access the ZyXEL Device's command line interface. Specify
which interfaces allow Telnet access and from which IP address the access can
come.
Click Advanced > Remote MGMT > Telnet tab to display the screen as shown.
Figure 89 Advanced > Remote MGMT > Telnet
182
DESCRIPTION
You may change the server port number for a service, if needed.
However, you must use the same port number in order to use that
service for remote management.
Select the interface(s) through which a computer may access the ZyXEL
Device using this service.
A secured client is a "trusted" computer that is allowed to communicate
with the ZyXEL Device using this service.
Select All to allow any computer to access the ZyXEL Device using this
service.
Choose Selected to just allow the computer with the IP address that
you specify to access the ZyXEL Device using this service.
Click this to save your changes.
Click this to restore your previously saved settings.
P-660HN-T1H User's Guide