Chapter 7 LAN Setup
The following table describes the fields in this screen.
Table 21 Network > LAN > IP
LABEL
IP Address
IP Subnet Mask
Apply
Cancel
Advanced Setup
7.2.1 The Advanced LAN IP Setup Screen
Use this screen to edit your ZyXEL Device's RIP, multicast and Windows
Networking settings. Click the Advanced Setup button in the LAN IP screen. The
screen appears as shown.
Figure 36 Network > LAN > IP: Advanced Setup
The following table describes the labels in this screen.
Table 22 Network > LAN > IP: Advanced Setup
LABEL
RIP & Multicast Setup
RIP Direction
RIP Version
Multicast
Back
Apply
Cancel
90
DESCRIPTION
Enter the LAN IP address you want to assign to your ZyXEL Device in
dotted decimal notation, for example, 192.168.1.1 (factory default).
Type the subnet mask of your network in dotted decimal notation, for
example 255.255.255.0 (factory default). Your ZyXEL Device
automatically computes the subnet mask based on the IP Address you
enter, so do not change this field unless you are instructed to do so.
Click this to save your changes.
Click this to restore your previously saved settings.
Click this to display the Advanced LAN Setup screen and edit more
details of your LAN setup.
DESCRIPTION
Select the RIP direction from None, Both, In Only and Out Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP (Internet Group Multicast Protocol) is a network-layer protocol
used to establish membership in a multicast group. The ZyXEL Device
supports IGMP-v1, IGMP-v2 and IGMP-v3. Select None to disable
it.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
P-660HN-T1H User's Guide